MATRIX Medical Gas Verifier Instrument On ENMET Corp.

Sensor/Transmitters,
Controllers, Samplers,
Single-Point Monitors Medical, Aerospace &
OEM Products Portable, Multi-Gas
Detectors Personal, Single-Gas
Detectors Respiratory, Compressed
Air Products New/Featured
Products Consulting Services,
Seminars and Expert
Witness Testimony


All Categories > Medical/Aerospace/Specialty Monitors > MATRIX Medical Gas Verifier Instrument > MATRIX Medical Gas Verifier Instrument

larger image

MATRIX Medical Gas Verifier Instrument

A Multi-Sensor Transportable Analyzer for Medical Gas Verifier/Certifier Field Usage.

This multi-sensor system has detection capabilities to simultaneously monitor carbon monoxide, carbon dioxide, oxygen, methane, nitrous oxide, trace hydrocarbons, anesthesia gases, and dew point. The transportable device weighs 15 lbs and has a rechargeable power pack. The internal lithium ion power supply has been shown to deliver over 10 hours of continuous operation for the fully operating multi-sensor instrument. The front panel presents two each 4-gas displays for the two master printed circuit boards within the instrument. After a warm up time of less than 5 minutes, 4 different gases can be measured by each half of the MATRIX for a total of eight.

Features · Specifications

Features

8 On-Board Gas Sensing Principles
Dual Digital Panel Display (4 channels each)
Rechargeable Lithium Ion Battery Pack for up to 12 Hours of Operation
8 foot 110V 50/60Hz Power Cord for Continuous Operation
Replaces a Variety of Limited Range Portables

Specifications

Gas Detected

Carbon Monoxide (CO)
Carbon Dioxide (CO₂)
Dew Point
Trace Hydrocarbons
Oxygen (O₂)
Anethesia Gases
Methane (CH₄)
Nitrous Oxide

Operating Power

Rechargeable lithium battery pack and 8 ft. 110V power cord

Run Time

Up to 12 hours per charge or continuous with 110V power cord

Enclosure

Polypropylene-copolymer case

Size

19 x 15 x 8 in (48 x 38 x 20 cm)

Weight

19 lb. (8.6 kg)

Alarm

LED visual indicator per channel and flow alarm

Display

2 lines, 16 characters each, alpha numeric LCD with Backlight

Humidity Range

0-95% non-condensing

Temperature Range

32° to 77°F (0° to 25°C)

Inlet Pressure

55 psig or lower (user provided regulator)

Inlet Flow Rate

1/2 lpm

Typical Calibration

Gas	Range	Alarm Point	Accuracy	Sensor Type
Carbon Monoxide (CO)	0-50 PPM	10 PPM	± 1 PPM	EC
Carbon Dioxide (CO₂)	0-5000 PPM	500 PPM	± 20 PPM	NDIR
Dew Point	-90°F to +50°F	39°F at 55 PSIG	± 2°F	TFP
PID (Trace Hydro Carbons)	0-20 PPM	5 PPM	± 1 PPM	PID
MOS (Anesthesia gases)	0-100 PPM	100 PPM	± 10 PPM	MOS
Oxygen (O₂)	0-99% by Vol.	0-99.9% by Vol.	± .1% by Vol.	PP/EC
Methane (CH₄)	0-5000 PPM	500 PPM	± 20 PPM	NDIR
Nitrous Oxide (N₂O)	0-99.9% by Vol.	96% by Vol.	± 3% by Vol.	NDIR

Download PDF

Email This Page

Save To Favorites

DOWNLOADS


		Matrix Literature (PDF, 155KB)

		Matrix Manual (PDF, 983KB)